My Mitsubishi Eclipse fuel injectors fire with the key in the on position, but the car doesnt start. I Changed out the intake manifold gasket, Turbo swapped to an after market Turbo and stuff. But the injectors fire as soon as the key turns to the on position and acts like the car is running, causing the motor to flood. When I swapped the gasket everything ran smooth for about 5 minutes, then when I pressed the throttle a bit the rpms shot high and then bogged down and the car died. Then this started happening, I had to disconnect the fuel rail, a bunch of sensors and everything but I went back and made sure everything is plugged in right and made sure nothing was grounding out wrong, no crossed wires etc. I'm lost, I've heard from CPU problems to ecu to pcu.