• Ask a Question
• Advice
• General
• Chevrolet
• Cobalt
• Answer

Answers from the Automotive Experts

Up Vote  

Dear Mary, It looks like you have to remove the headlight assembly before you can replace the bulb. This means that you'll have to remove the cover on the front half of the engine to get access to the headlight bolts. This seems like a lot of work just to replace a headlight bulb, but each manufacturer is different. In this case you cannot get enough access behind the light to remove the bulb without pulling the headlight assembly out away from the vehicle. I'm sure you can probably do this if you have the patience and the tools to remove all the screws. Good luck. Lori Johnson www.ladiesstartyourengines.net

⟩ Answered on Jan 30th, 2009 by Lori Johnson, Owner and Instructor at Ladies Start Your Engines

Contribute to this question:

Related Chevrolet Cobalt FAQs

• Car has no power when cold outside below 15 degrees front end shacks at 55 stops at 65 ? Read More
• What type of transmission fluid does the Chevrolet Cobalt use and how much is needed for ... Read More
• I have a 2007 Chevy Cobalt and have recently started experiencing when I drive over 50mph ... Read More
• My daughters Chevrolet Cobalt won't start . She put a new starter and battery.It will ... Read More
• My odometer and speedometer are jumping back and forth not reading correctly also my ... Read More
• It seems the 07 Chevrolet Cobalt sounds like its high revs. What is the tachometer ... Read More
• The check engine light for my 2006 Chevy Cobalt is on and is solid. I had it tested and ... Read More
• I was at a chevy dealership and this is the price break down to replace an alternator and ... Read More
• Will disconnecting the battery on my 2007 Chevy Cobalt reset the tcm? My transmission ... Read More
• My Chevrolet Cobalt started sputtering and cut off tonight in a fast food parking lot. it ... Read More