At AskPatty, we focus on giving the best automotive advice for helping people with their car questions. If you have a car question, start by asking our automotive experts. You can also use the search bar in the top right to search for a specific issue. All car questions are welcome and we look forward to helping you!
Ask a QuestionAutomotive Advice - Page 83 of 646
I recently bought a 1991 honda accord ex station wagon with manual transmission and roughly 153,000 miles. it recently just died on me. I had the plugs, wires, pcv valve, distributer cap, igniter, and wiring around it replaced and it ran fine for one day. The next day, i went to start it and at first nothing. Tried a second time, it started right up. ...
When i turn right, hit any kinda bump, or step on gas my front end makes a loud popping noise. And also the tire feels wobbly. What could it be?
These past 2 months my CRV has been idle because I was hospitalized. I was discharged last week only to find that the car had seized; brakes and hand brake were successfully freed. The problem being that I cannot engage any gear but remains in neutral. I have had no problems before hospital and the car was running as normal.
Thanks for any ...
I have a Dodge Neon SXT. It drives good, but when I come to a complete stop it idles rough only on drive it idles rough
Im in the market for an used Honda Pilot. My budget is a flexible but i initially aimed to stay under 13500 with title and tax. I have two options at the moment. One is a 2008 pilot with 102k miles at 12.9k. belt and water pump have been replaced. Second option is a 2011 pilot, 102k miles priced at 14.5k w/approx 1.5k of repairs (depending ...
When I drive it feels like the power steering has gone out, it's really hard to turn right and left. However, when we took everything apart the pump was working. So we took off the reservoir, cleaned out the filter, and flushed the system. It's still not working. In fact it seems like the whining(when I turn) has gotten worse.
Can it be the rack and ...
In what order do I insert the wires into the position sensor if the sensor part is lying with the clip aiming upward?