With the ignition switch "ON" and not running, Press the indicator knob for mileage/oil life/ trip until you are viewing the "oil life" Press and hold the reset knob for 10-15 seconds and you should reset to 100%.
〉 Answered on Dec 17th, 2014 by Amanda J. Pierce, MBA "AJ", Certified Mechanic, Project Coordinator; Primavera Scheduler at VIGOR Alaska Industrial Shipyard & BizzM3ch Solutions
You need to reset the 'maintenance light'.
You can find the directions in your owners manual.
〉 Answered on Dec 17th, 2014 by Amy Mattinat, Owner and Author at Auto Craftsmen Ltd
Make sure there aren't any leaks and the level is good. If so, there may be an issue with the pressure sensor.
〉 Answered on Dec 17th, 2014 by Gelina Aquilina, Service Advisor / Mechanic at
Most newer vehicles are now equipped with an oil life monitoring system. This system needs to be manually reset when the oil is changed.
To reset the oil life monitor on this vehicle:
- Turn the ignition switch to the on position.
- Press the Select/Reset knob until the oil life indicator is displayed
-Hold the Select/Reset knob for 10 seconds(oil life should start to blink)
-Release and Hold the Select/Reset knob for 5 seconds. Oil life monitor should show "100".
〉 Answered on Dec 17th, 2014 by Helaine Kurot, Owner/Technician at 360 Automotive
Hi Leo, On your 2007 Honda: Once the oil has been change, the oil maintenance light needs to be reset. Bring it back to the shop to have them reset it or check your owner's manual for reset instructions. Good luck.
〉 Answered on Dec 17th, 2014 by Maryann Croce, Owner at Croce’s Transmission Specialists