Your CKP should be located on the transmission housing, it has its own ribbed black wire protector, and has (2) bolts. Be aware that before tightening the sensor mounting bolt, be sure the sensor is completely flush to the mounting surface. If the sensor is not flush, damage to the sensor mounting tang may result. The Cam/Crank Variation Relearn procedure must be performed anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valve train, camshaft and/or crankshaft sensors or components
〉 Answered on Sep 23rd, 2013 by Amanda J. Pierce, MBA "AJ", Certified Mechanic, Project Coordinator; Primavera Scheduler at VIGOR Alaska Industrial Shipyard & BizzM3ch Solutions
The Crankshaft postion sensor should be on the back of the cylinder head, near the transmission. It is easier to acess from under the car, and there may be a heat shield in the way.
〉 Answered on Sep 23rd, 2013 by Helaine Kurot, Owner/Technician at 360 Automotive